AIGLE Macchine srl

Flocking Profiles

Flocking Profiles

AIGLE's machines are designed not only to flock rubber profiles. These machines are mainly used in the automotive industry as flocking gives profiles a soft, cleaning and aesthetic effect.

Forced Air Cooling Unit – mod. AFC

  The Forced Air Cooling Unit mod. AFC is placed in a profile flocking line after the vulcanisation oven; its function is to lower the profile temperature before sanding and glue spraying. The unit is equipped with an A.C. motorized conveyor belt made with...

Brushing Unit – mod. SZ3

The Brushing Unit mod. SZ3 is used to clean profiles from sanding residue before glue application, or from flock residue after vulcanization. It consists of: - A structure on four wheels, allowing easy movability of the machine - Three brushes with natural...

Adhesive Application Cabin – mod. ADP6

The Adhesive Application Cabin mod. ADP6 is completely built in stainless steel and is equipped with anti-spark exhausters for adhesive fumes. The cabin is equipped to apply glue onto profiles using distributing brushes which can be easily replaced and oriented...

Flocking Machine Group – mod. F-01-800

  The Flocking Machine mod. FR1/R can be used independently or combined, either with one module or more, in order to obtain higher flocking speeds, or with a Flocking Machine mod. FR/ESP for flocking undercut profiles. The module includes: - Electrostatic...

Cleaning and Cooling Unit – mod. WCP6

  The Cleaning and Cooling Unit mod. WCP6 is divided into three sections: - Water cooling and cleaning: a set of properly positioned nozzles uniformly sprays nebulized water on the profile, in this way the excess flock is removed and the profile...

Caterpillar – mod. CTP800

The Caterpillar mod. CTP800 consists of a strong, motorized frame installed in the lower part, and a couple of opposed 10 mm rubber covered “Poly V” belts, installed in the upper part. Drive transmission is obtained with a special “Schmidt” joint. A double...

Pre-Vulcanization Unit – mod. NIRV-101

The Pre-Vulcanization Unit - mod NIRV - 101 has 6 sections. Each section has two infrared lights where each lamp has an approx. length of 960 mm. The temperature of each zone can be adjusted separately via the PLC system.   - Max. surface temperature of...