AIGLE Macchine srl

Automotive industry and industrial components

AIGLE’s flocking, laminating and coating machines can be applied in the automotive and industrial components industry; for example: flocked rubber profiles, flocked glove compartments, carpets, coated seats, various flocked components, etc.

Laminating Group – mod. GRA/1
Laminating Equipment

The Laminating Group mod. GRA/1 is for wet lamination and dry-coat lamination technology. It consists of: - Upper unwinding unit with aligning system of the fabric to be laminated with fabric unwinding position with couples of beam-holder self-closing chucks and...

Hot Melt Lamination Line – mod. LHM
Laminating Equipment

  The most important hot-melt application systems are the multi-roller system and the engraving roller system. The use of proper extruders and melters guarantees a proper feeding of the hot-melt adhesive to the application area. The main differences between...

Laminating Line – mod. AT2
Laminating Equipment

  The Laminating Line mod. AT2 is composed of: - Unwinding Group mod. UT2/AS, consisting of: UNWINDING TROLLEY FOR LARGE ROLLS mod. UT2 AXIAL UNWINDER mod. AS with universal fast joint for unwinding trolley connection - Coating Head mod. BS2,...

Flame Bonding Lamination Line – mod. LAF
Laminating Equipment

Advantages of our technology are: - Laminating calander: it has two couples of horizontally placed cylinders. The burners are placed horizontally: in such a way that they remain clean, thus avoiding frequent cleaning halts and reducing the amount of waste material....

Powder Distribution Unit – mod. TDP/M
Laminating Equipment

The Powder Distribution Unit mod. TDP/M consists of one hopper containing powder, with an inverter-controlled dosing cylinder of adjustable speeds placed at its base. A doctor blade opposed to the cylinder is used to adjust powder output. A rotating brush is mounted...

Powder Scattering Laminating Line – mod. LAP
Laminating Equipment

The Powder Scattering Laminating Line - mod. LAP consists of: - a frame unwinder with "Omega" type drawing unit - a powder distribution unit - Mod. TDP/M - a laminating unit - Mod. GRA-1 - a pre-heating infrared lamp panel - Mod. FIR-S - a cooling group - a...

Forced Air Cooling Unit – mod. AFC
Flocking

  The Forced Air Cooling Unit mod. AFC is placed in a profile flocking line after the vulcanisation oven; its function is to lower the profile temperature before sanding and glue spraying. The unit is equipped with an A.C. motorized conveyor belt made with...

Automatic Flaming Cabinet – mod. CF/R
Flocking

  The Flaming Cabinet mod. CF/R consists of: - Closed cabin for safety protection - Gas burner for flame treatment equipped with a spark plug, detection probe and security of flame - Robot - Internal light (2 x 18W) - Control cabinet With...

Flocking Machine – mod. FR2
Flocking

The Flocking Machine mod. FR2 consists of: - Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable and the screen can easily be removed - A lifting...

Flocking Machine – mod. FR6
Flocking

The Flocking Machine mod. FR6 consists of three base modules, each one consisting of: - Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable. - The...

Blowing/Embossing Machine – mod. AP1
Flocking

The Blowing/Embossing Machine mod. AP1 is used to emboss flocked fabric. It must be placed between the flocking unit and the oven in order that it operates while the adhesive is still wet. The embossing effect is obtained by blowing air through rotary screen...

Glue Spraying Cabinet – mod. CV
Flocking

    The Glue Spraying Cabinet mod. CV is closed on three sides and open at the front. It consists of: - Closed cabin for environment protection - Double dry filtration system and Paint-Stop cover for quick replacement - Internal light (2 x...

Brushing Unit – mod. SZ2
Flocking

    The Brushing Unit mod. SZ2 consists of: - Two rotating brushes with a “beater-bar” effect that is opposed to the flocked fabric and with adjustable pressure. Brushes are sealed inside the suction chambers, in order to avoid flock...

Brushing Unit – mod. SZ3
Flocking

The Brushing Unit mod. SZ3 is used to clean profiles from sanding residue before glue application, or from flock residue after vulcanization. It consists of: - A structure on four wheels, allowing easy movability of the machine - Three brushes with natural...

Adhesive Application Cabin – mod. ADP6
Flocking

The Adhesive Application Cabin mod. ADP6 is completely built in stainless steel and is equipped with anti-spark exhausters for adhesive fumes. The cabin is equipped to apply glue onto profiles using distributing brushes which can be easily replaced and oriented...

Flocking Machine Group – mod. F-01-800
Flocking

  The Flocking Machine mod. FR1/R can be used independently or combined, either with one module or more, in order to obtain higher flocking speeds, or with a Flocking Machine mod. FR/ESP for flocking undercut profiles. The module includes: - Electrostatic...

Infrared Pre-Drying Oven – mod. FIR/S
Flocking

    Infrared Pre-Drying Oven has been designed for different purposes: - Pre-drying: can easily be mounted between the two heads of any rotary printing machine. It can be joined with units of flocking and/or distribution glitters. The oven allows...

Flocking Cabinet – mod. CTA/TO
Flocking

  The Flocking Cabinet mod. CTA/TO is designed to flock objects. The machine is equipped with: - Sealed cabinet to avoid flock dispersion - Flocking hopper, equipped with brushes oscillating pneumatically over an electrostatic screen - Handwheel...

Drying Oven – mod. FA1
Flocking

This is an oven structure with forced convection and indirect exchange with hot air recirculating around the electric resistances. The structure is made with bars and panels in carbon steel and galvanized steel inside, with thermic insulation with rock wool and...

Laboratory Flocking Line – mod. LFL
Flocking

    The Laboratory Flocking Line mod. LFL consists of: - A trolley supporting frame for all machine elements. - One hopper with variable speed, a motorized rotating brush with an adjustable through inverter. A handwheel is provided for height...

Cleaning and Cooling Unit – mod. WCP6
Flocking

  The Cleaning and Cooling Unit mod. WCP6 is divided into three sections: - Water cooling and cleaning: a set of properly positioned nozzles uniformly sprays nebulized water on the profile, in this way the excess flock is removed and the profile...

Flocking Machine – mod. TT2
Flocking

  The Flocking Machine mod. TT2 is designed to flock objects and flat surfaces. The machine consists of: - One variable speed motorized conveyor belt made with a fiberglass net - Two Plexiglas flocking hoppers - Two rotating brushes inside the...

Caterpillar – mod. CTP800
Flocking

The Caterpillar mod. CTP800 consists of a strong, motorized frame installed in the lower part, and a couple of opposed 10 mm rubber covered “Poly V” belts, installed in the upper part. Drive transmission is obtained with a special “Schmidt” joint. A double...

Flocking Machine – mod. TTS
Flocking

The Flocking Machine mod. TTS is designed to flock car glove boxes and objects. The unit consists of: - A completely sealed cabin to prevent flock pollution - A variable speed conveyor belt that can be equipped with special adaptable feeding guides for...

Pre-Vulcanization Unit – mod. NIRV-101
Flocking

The Pre-Vulcanization Unit - mod NIRV - 101 has 6 sections. Each section has two infrared lights where each lamp has an approx. length of 960 mm. The temperature of each zone can be adjusted separately via the PLC system.   - Max. surface temperature of...

Flocking Machine – mod. TO
Flocking

  The Flocking Machine mod. TO is designed to flock t-shirts and can be mounted on common carousel printers. It can be supplied in two different versions, with or without flock collector or suction unit. It is equipped with: - A flocking hopper,...

Flocking Machine – mod. TO/S
Flocking

    Flocking Machines mod. TO/S are designed to flock t-shirts and sheets and can be mounted on common carousel printers. Two or more Flocking Machines mod. TO/S can be fitted on a carousel printer and used for multicolor flocking. Each unit...

FLOCKING EQUIPMENT FOR LATEX GLOVES
Flocking

Over the years, AIGLE has developed several Flocking Equipment for Latex Gloves. The glove is flocked to facilitate the passage of the hand when worn and to increase its comfort: the flock therefore stops the latex coming in direct contact with the skin. The...

FLOCKING EQUIPMENT FOR RUBBER SLEEVES
Flocking

Over the years, AIGLE has developed several Flocking Equipment for Rubber Sleeves: they are tubular sheaths with different diameters and lengths that are flocked and then vulcanized; subsequently they are cut into strips in a closed loop so that they can be used as...

FLOCKING EQUIPMENT FOR SPRINGS
Flocking

Over the years, AIGLE has developed several Flocking Equipment for Metallic Springs, used mainly in the automotive industry. The flocked springs are used in the systems for opening doors. The flock reduces the noise in the passenger compartment and helps the sliding of...

PAINTING EQUIPMENT FOR SPRINGS
Flocking

    Over the years, AIGLE has developed several painting equipment for metallic springs, used mainly in the automotive industry. The painted springs are used in the systems for opening doors. The paint protects the spring from wear and tear over the...

Drying Oven with Conveyor – mod. FOP/T
Ovens and Finishing

The Drying Oven with Conveyor mod. FOP/T’s main features are: - Heating system, which is equipped with a recirculation fan, an oil battery, blowing channels, an air recovery channel and a filter. To ensure uniform heating and air distribution, fields are opposed...

Blowing/Embossing Machine – mod. AP1
Ovens and Finishing

The Blowing/Embossing Machine mod. AP1 is used to emboss flocked fabric. It must be placed between the flocking unit and the oven in order that it operates while the adhesive is still wet. The embossing effect is obtained by blowing air through rotary screen...

Drying Oven for Coating Lines – mod. FOP/C
Ovens and Finishing

    Drying Oven for Coating Lines mod. FOP/C’s main features are: - Heating system, which is equipped with a recirculation fan, an oil battery, blowing channels, an air recovery channel and a filter. To ensure uniform heating and air distribution,...

Stenter – mod. RAM/F
Ovens and Finishing

Features of the Stenter mod. RAM/F: - Heating system; equipped with a circulation fan, a battery, oil related blowers, channel recovery and a filter. To ensure uniform heating and air distribution, the fields are opposing right/left. In order to reduce the...

Stenter with Double Heating – mod. RAM/S
Ovens and Finishing

The main features of a Stenter with Double Heating mod. RAM/S are: - Heating system; built in order to obtain different temperatures above and below the product. This system makes the Stenter with Double Heating mod. RAM/S particularly suitable for dry carpets coated...

Oven for Digital Plotter – mod. PLOTTER-HEAT
Ovens and Finishing

This is part of the innovative drying group for printed fabrics with digital technology. The unit can be installed at the outlet of a digital textile plotter. Its main characteristics: - Constant and efficient exhaustion of the drying-process fumes - Drying...

Infrared Pre-Drying Oven – mod. FIR/S
Ovens and Finishing

    Infrared Pre-Drying Oven has been designed for different purposes: - Pre-drying: can easily be mounted between the two heads of any rotary printing machine. It can be joined with units of flocking and/or distribution glitters. The oven allows...

Drying Oven – mod. FA1
Ovens and Finishing

This is an oven structure with forced convection and indirect exchange with hot air recirculating around the electric resistances. The structure is made with bars and panels in carbon steel and galvanized steel inside, with thermic insulation with rock wool and...

Calendering Unit – mod. GG/IR
Ovens and Finishing

The Calendering Unit mod. GG/IR can operate with hot or cold calendering roll. It consists of: - Two heavy duty and steady machine shoulders which carry all the machine elements - Counter roller covered with hard neoprene rubber - Hard chromed ground upper...

Three Head Printing Line – mod. LST
Ovens and Finishing

The Three Head Printing Line mod. LST allows: - The reduction of the cost of the printing cylinders (only the external shell is replaced) - Easy access to replace the printing cylinders - Change in the fabric tension when the machine stops or when the printing...

Transfer Coating Line – mod. LSPT
Coating

  Synthetic leather is obtained by coating on release paper layers of PVC and/or polyurethane (PU).   These are dried at high temperatures through coating line ovens.   Before the detachment and the consequent separation of the product...

Coating Machine – mod. BSR/F
Coating

  The Coating Machine mod. BSR/F is used to coat fabric (with resin and/or adhesives). The machine’s features are: - Easy implementation: the coating machine can be placed at the inlet of a common stenter - Maximum control over compound quantity;...

Laminating Group – mod. GRA/1
Coating

The Laminating Group mod. GRA/1 is for wet lamination and dry-coat lamination technology. It consists of: - Upper unwinding unit with aligning system of the fabric to be laminated with fabric unwinding position with couples of beam-holder self-closing chucks and...

Coating Head – mod. BS
Coating

The Coating Head mod. BS has been designed and built to coat using machinery that can be easily implemented. The following are some of the advantages that come with this machine: - The machine can be placed at the inlet of a common stenter, occupying minimum...

Rotary Screen Coater – mod. BS1
Coating

    The Rotary Screen Coater mod. BS1 is used to coat and print fabric (with pigments, resin and adhesives) and for pattern flocking. The machine’s main features are: - Rotary screen pneumatic lifting - Removable internal paste feeding pipe -...

Rotary Screen Coater – mod. BS1/T
Coating

  The Rotary Screen Coater mod. BS1/T is used to coat and print fabric (with pigments, resin and adhesives), and for pattern flocking. The machine’s main features are: - Rotary screen pneumatic lifting - Removable paste feeding pipe with doctor...

Coating Head – mod. BS2
Coating

The Coating Head mod. BS2 has been designed and built so that different coating techniques can be employed. The following are some of the advantages that this machine has to offer: - Easy implementation: the coating head can be placed at the inlet of a common...

Coating Machine – mod. BSR/M
Coating

    The Coating Machine mod. BSR/M is used to coat fabric (with resin and adhesives). The unit can be used for air-coating, coating on cylinder, and coating on photo-engraved cylinder. The machine’s features include: - Easy implementation:...

Coating Head – mod. BS2/M
Coating

The Coating Head mod. BS2/M has been designed and built so that different coating techniques can be employed. The following are some of the advantages the machine has to offer: - Easy implementation: the coating head can be placed at the inlet of a common...

Coagulation Line – mod. LC
Coating

  The features of the Coagulation Line - mod. LC are: - Fabric, unwound from rolls, is threaded through the accumulator. The accumulator contains 40 linear meters of base-cloth, providing sufficient time to replace an empty roll with a new roll and joining...

Coating Machine – mod. BSR/R
Coating

  The Coating Machine mod. BSR/R is used to coat fabric, paper and TNT (with resin and adhesives). The machine’ features are: - Easy implementation: the coating machine can be placed at the inlet of a common stenter/oven - Maximum control over compound...

Stenter – mod. RAM/F
Coating

Features of the Stenter mod. RAM/F: - Heating system; equipped with a circulation fan, a battery, oil related blowers, channel recovery and a filter. To ensure uniform heating and air distribution, the fields are opposing right/left. In order to reduce the...

Calendering Unit – mod. GG/IR
Coating

The Calendering Unit mod. GG/IR can operate with hot or cold calendering roll. It consists of: - Two heavy duty and steady machine shoulders which carry all the machine elements - Counter roller covered with hard neoprene rubber - Hard chromed ground upper...

Powder Distribution Unit – mod. TDP/M
Coating

The Powder Distribution Unit mod. TDP/M consists of one hopper containing powder, with an inverter-controlled dosing cylinder of adjustable speeds placed at its base. A doctor blade opposed to the cylinder is used to adjust powder output. A rotating brush is mounted...