AIGLE Macchine srl

Leather goods

AIGLE’s flocking, laminating and coating machines can be applied in the leather goods industry for the production of: footwear, leather clothing, bags, leather items, etc.

Laminating Group – mod. GRA/1
Laminating Equipment

The Laminating Group mod. GRA/1 is for wet lamination and dry-coat lamination technology. It consists of: - Upper unwinding unit with aligning system of the fabric to be laminated with fabric unwinding position with couples of beam-holder self-closing chucks and...

Hot Melt Lamination Line – mod. LHM
Laminating Equipment

  The most important hot-melt application systems are the multi-roller system and the engraving roller system. The use of proper extruders and melters guarantees a proper feeding of the hot-melt adhesive to the application area. The main differences between...

Laminating Line – mod. AT2
Laminating Equipment

  The Laminating Line mod. AT2 is composed of: - Unwinding Group mod. UT2/AS, consisting of: UNWINDING TROLLEY FOR LARGE ROLLS mod. UT2 AXIAL UNWINDER mod. AS with universal fast joint for unwinding trolley connection - Coating Head mod. BS2,...

Powder Distribution Unit – mod. TDP/M
Laminating Equipment

The Powder Distribution Unit mod. TDP/M consists of one hopper containing powder, with an inverter-controlled dosing cylinder of adjustable speeds placed at its base. A doctor blade opposed to the cylinder is used to adjust powder output. A rotating brush is mounted...

Flocking Machine – mod. FR2
Flocking

The Flocking Machine mod. FR2 consists of: - Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable and the screen can easily be removed - A lifting...

Flocking Machine – mod. FR6
Flocking

The Flocking Machine mod. FR6 consists of three base modules, each one consisting of: - Two electrostatic hoppers with two multi-row rotating brushes. Each brush is opposed to a stainless steel screen. Rotation speed and pressure are both adjustable. - The...

Brushing Unit – mod. SZ2
Flocking

    The Brushing Unit mod. SZ2 consists of: - Two rotating brushes with a “beater-bar” effect that is opposed to the flocked fabric and with adjustable pressure. Brushes are sealed inside the suction chambers, in order to avoid flock...

Drying Oven – mod. FA1
Flocking

This is an oven structure with forced convection and indirect exchange with hot air recirculating around the electric resistances. The structure is made with bars and panels in carbon steel and galvanized steel inside, with thermic insulation with rock wool and...

Laboratory Flocking Line – mod. LFL
Flocking

    The Laboratory Flocking Line mod. LFL consists of: - A trolley supporting frame for all machine elements. - One hopper with variable speed, a motorized rotating brush with an adjustable through inverter. A handwheel is provided for height...

Flocking Machine – mod. TT2
Flocking

  The Flocking Machine mod. TT2 is designed to flock objects and flat surfaces. The machine consists of: - One variable speed motorized conveyor belt made with a fiberglass net - Two Plexiglas flocking hoppers - Two rotating brushes inside the...

Flocking Machine – mod. TTS
Flocking

The Flocking Machine mod. TTS is designed to flock car glove boxes and objects. The unit consists of: - A completely sealed cabin to prevent flock pollution - A variable speed conveyor belt that can be equipped with special adaptable feeding guides for...

Flocking Machine – mod. TO
Flocking

  The Flocking Machine mod. TO is designed to flock t-shirts and can be mounted on common carousel printers. It can be supplied in two different versions, with or without flock collector or suction unit. It is equipped with: - A flocking hopper,...

Flocking Machine – mod. TO/S
Flocking

    Flocking Machines mod. TO/S are designed to flock t-shirts and sheets and can be mounted on common carousel printers. Two or more Flocking Machines mod. TO/S can be fitted on a carousel printer and used for multicolor flocking. Each unit...

Drying Oven with Conveyor – mod. FOP/T
Ovens and Finishing

The Drying Oven with Conveyor mod. FOP/T’s main features are: - Heating system, which is equipped with a recirculation fan, an oil battery, blowing channels, an air recovery channel and a filter. To ensure uniform heating and air distribution, fields are opposed...

Drying Oven for Coating Lines – mod. FOP/C
Ovens and Finishing

    Drying Oven for Coating Lines mod. FOP/C’s main features are: - Heating system, which is equipped with a recirculation fan, an oil battery, blowing channels, an air recovery channel and a filter. To ensure uniform heating and air distribution,...

Stenter – mod. RAM/F
Ovens and Finishing

Features of the Stenter mod. RAM/F: - Heating system; equipped with a circulation fan, a battery, oil related blowers, channel recovery and a filter. To ensure uniform heating and air distribution, the fields are opposing right/left. In order to reduce the...

Stenter with Double Heating – mod. RAM/S
Ovens and Finishing

The main features of a Stenter with Double Heating mod. RAM/S are: - Heating system; built in order to obtain different temperatures above and below the product. This system makes the Stenter with Double Heating mod. RAM/S particularly suitable for dry carpets coated...

Drying Oven – mod. FA1
Ovens and Finishing

This is an oven structure with forced convection and indirect exchange with hot air recirculating around the electric resistances. The structure is made with bars and panels in carbon steel and galvanized steel inside, with thermic insulation with rock wool and...

Calendering Unit – mod. GG/IR
Ovens and Finishing

The Calendering Unit mod. GG/IR can operate with hot or cold calendering roll. It consists of: - Two heavy duty and steady machine shoulders which carry all the machine elements - Counter roller covered with hard neoprene rubber - Hard chromed ground upper...

Three Head Printing Line – mod. LST
Ovens and Finishing

The Three Head Printing Line mod. LST allows: - The reduction of the cost of the printing cylinders (only the external shell is replaced) - Easy access to replace the printing cylinders - Change in the fabric tension when the machine stops or when the printing...

Transfer Coating Line – mod. LSPT
Coating

  Synthetic leather is obtained by coating on release paper layers of PVC and/or polyurethane (PU).   These are dried at high temperatures through coating line ovens.   Before the detachment and the consequent separation of the product...

Coating Machine – mod. BSR/F
Coating

  The Coating Machine mod. BSR/F is used to coat fabric (with resin and/or adhesives). The machine’s features are: - Easy implementation: the coating machine can be placed at the inlet of a common stenter - Maximum control over compound quantity;...

Laminating Group – mod. GRA/1
Coating

The Laminating Group mod. GRA/1 is for wet lamination and dry-coat lamination technology. It consists of: - Upper unwinding unit with aligning system of the fabric to be laminated with fabric unwinding position with couples of beam-holder self-closing chucks and...

Coating Head – mod. BS
Coating

The Coating Head mod. BS has been designed and built to coat using machinery that can be easily implemented. The following are some of the advantages that come with this machine: - The machine can be placed at the inlet of a common stenter, occupying minimum...

Rotary Screen Coater – mod. BS1
Coating

    The Rotary Screen Coater mod. BS1 is used to coat and print fabric (with pigments, resin and adhesives) and for pattern flocking. The machine’s main features are: - Rotary screen pneumatic lifting - Removable internal paste feeding pipe -...

Rotary Screen Coater – mod. BS1/T
Coating

  The Rotary Screen Coater mod. BS1/T is used to coat and print fabric (with pigments, resin and adhesives), and for pattern flocking. The machine’s main features are: - Rotary screen pneumatic lifting - Removable paste feeding pipe with doctor...

Coating Head – mod. BS2
Coating

The Coating Head mod. BS2 has been designed and built so that different coating techniques can be employed. The following are some of the advantages that this machine has to offer: - Easy implementation: the coating head can be placed at the inlet of a common...

Coating Machine – mod. BSR/M
Coating

    The Coating Machine mod. BSR/M is used to coat fabric (with resin and adhesives). The unit can be used for air-coating, coating on cylinder, and coating on photo-engraved cylinder. The machine’s features include: - Easy implementation:...

Coating Head – mod. BS2/M
Coating

The Coating Head mod. BS2/M has been designed and built so that different coating techniques can be employed. The following are some of the advantages the machine has to offer: - Easy implementation: the coating head can be placed at the inlet of a common...

Coagulation Line – mod. LC
Coating

  The features of the Coagulation Line - mod. LC are: - Fabric, unwound from rolls, is threaded through the accumulator. The accumulator contains 40 linear meters of base-cloth, providing sufficient time to replace an empty roll with a new roll and joining...

Coating Machine – mod. BSR/R
Coating

  The Coating Machine mod. BSR/R is used to coat fabric, paper and TNT (with resin and adhesives). The machine’ features are: - Easy implementation: the coating machine can be placed at the inlet of a common stenter/oven - Maximum control over compound...

Stenter – mod. RAM/F
Coating

Features of the Stenter mod. RAM/F: - Heating system; equipped with a circulation fan, a battery, oil related blowers, channel recovery and a filter. To ensure uniform heating and air distribution, the fields are opposing right/left. In order to reduce the...

Calendering Unit – mod. GG/IR
Coating

The Calendering Unit mod. GG/IR can operate with hot or cold calendering roll. It consists of: - Two heavy duty and steady machine shoulders which carry all the machine elements - Counter roller covered with hard neoprene rubber - Hard chromed ground upper...

Powder Distribution Unit – mod. TDP/M
Coating

The Powder Distribution Unit mod. TDP/M consists of one hopper containing powder, with an inverter-controlled dosing cylinder of adjustable speeds placed at its base. A doctor blade opposed to the cylinder is used to adjust powder output. A rotating brush is mounted...